Rent on request or buyPUDU2 models

PUDU CC1 range

Four-in-one robot that sweeps, scrubs, vacuums and mops large indoor floors on its own.

The PUDU CC1 and CC1 Pro are autonomous floor cleaners that sweep, scrub, vacuum and mop in one machine. The Pro adds a rear AI camera that checks its own work and goes back over stains it missed.

Sweep, scrub, vacuum and mop: 4-in-1
Maximum suction (CC1): 17,000 Pa
Full-coverage cleaning rate: 700-1,000 m²/h
Run-time in silent mopping mode: 9 h
Charging time: < 3 h
Cleaning noise (CC1): < 70 dB(A)

Request a rental Buy from Robots International

Guide price from US$19,950 at Robots International. Excl. tax and shipping.

Photos: Robots International. View on their store

The range

Compare the models

Model	What's different	Guide price	Buy
CC1	Core 4-in-1 model with 17,000 Pa suction and breakpoint resume	US$19,950	View and buy
CC1 Pro	Adds rear AI camera, AI spot scrubbing, heatmaps and IEC 63327 certification	US$21,995	View and buy

We're an affiliate of Robots International and may earn a commission if you buy through our links. It doesn't change the price you pay. Guide prices are in US dollars, exclude tax and shipping, and may change.

Overview

About the PUDU CC1 range

The CC1 range suits anyone who looks after large indoor floors and wants one machine to cover several cleaning routines. Both models carry a 50 Ah battery, twin 15 L water tanks and a 10.1-inch screen, and both find their way using a mix of laser and visual mapping. The standard CC1 offers up to 17,000 Pa of suction and cleans 700 to 1,000 m² an hour. If the battery runs low, it remembers where it stopped and finishes the job after charging. The CC1 Pro adds AI spot scrubbing, a rear camera that spots leftover stains and triggers a re-clean, and a heatmap report after each task. Docking and water stations are sold separately.

Key features

Four cleaning modes in one robot

Resumes an unfinished task after recharging

Laser and visual SLAM navigation

Optional dock and mobile water station, no plumbing work

Extendable handle for mapping and manual control

Cleaning reports with time and area covered

Ideal for

Office buildingsSchools and collegesShopping centres and retail floorsHotels and hospitality venuesHospitals and public buildings

In practice

Where it earns its keep

Overnight office cleaning

Schedule the robot to work lobbies, corridors and open-plan floors after hours. If it needs to recharge mid-route, it picks up where it left off.

Mixed floors in hotels

Hard floors are handled by the built-in modes. On the standard CC1, carpeted corridors can be vacuumed once the separate carpet assembly is fitted.

Proof of cleaning for contractors

The CC1 Pro produces a heatmap after each task, giving facility managers a visual record of what was cleaned and where stains remain.

Official video

See it in action

Video: Pudu Robotics on YouTube

Specifications

Spec sheet

Figures for the PUDU CC1.

Cleaning functions: Sweeping, scrubbing, vacuuming and mopping
Dimensions (L x W x H): 629 x 552 x 695 mm
Weight: 75 kg
Maximum suction: 17,000 Pa
Cleaning efficiency: 700-1,000 m²/h
Cruise speed: Up to 1.2 m/s
Battery: 50 Ah
Run-time: Scrubbing 5 h; sweeping, vacuuming and mopping 5 h; carpet vacuuming 4 h; silent mopping 9 h
Charging time: Under 3 h
Water tanks: 15 L clean, 15 L waste
Dustbin: 2.5 L
Cleaning noise: Under 70 dB(A)
Navigation: Laser and visual SLAM
Minimum path clearance: 70 cm